Skip to main content
Fig. 3 | BMC Medical Research Methodology

Fig. 3

From: Developing a system that can automatically detect health changes using transfer times of older adults

Fig. 3

Plot of the average Detection Rate (DR), Average Run Length (ARL) and average number of false alarms (FPR) calculated for a wide variety of parameters over the different simulation scenarios used for parameter optimization. Colors represent the average number of false alarms. The initial parameters were chosen by a rule of thumb (TCRA: k=0.5 and h=3 and ERSRA: λ=0.15 and L=3), optimized parameters are chosen based on this plot giving priority to ARL and DR over FPR (TCRA: k=0.42 and h=2.08 and ERSRA: λ=0.18 and L=2)

Back to article page